Видео

Thanks for the tip! I'm sure with careful grind on the surface plate will make a huge difference from what it is at the moment. Thanks again! All the best Jimmy

@JimmysCanal That could work but try not to remove material between the holes until it's getting flat and if you want to measure how parallell it is prop it up on 3 pieces of shim stock between the holes on the top side, then it's sitting flat and hopefully perpendicular to the surface plate.

@@o0xenon0o Thank you once again! Regards from Greece Jimmy

It's a mixture of pitch with pine rosin, fine gypsum and oil. If you're interested making it, look on the comments below and you'll find the recipe with more information.

Thanks for the comment and the tip! I'm glad that you like it! Regards from Greece Dimitris

Thank you very much, I'm glad that you like it! All the best Jimmy

Thank you very much, I appreciate your comment sir! All the best Dimitris

Thank you, glad to know that you like it! Cheers Dimitris

Κωστή μου σε ευχαριστώ πολύ! Δε βλέπω την ώρα να ξεκινήσω το καινούργιο πρότζεκτ. Καλή συνέχεια! Δημήτρης

If you've noticed a leak, it's definitely worth doing this repair. Besides the satisfaction you'll have once you done it, you'll increase the value of your machine. Thank you for the comment! Cheers Dimitris

Yes it really is...I should have done it earlier. Thanks for the comment, I appreciate it! All the best Dimitris

Thank you very much! I appreciate your comment sir! Cheers Dimitris

Thank you my friend! The whole process of disassembling and reassembling was really easy, I'm sure that you would done it with the same ease! I'm glad that you liked the project. Thanks again. Take care Dimitris

I agree, anticlockwise locks better the tool holder

Ευχαριστώ πάρα πολύ! Να είσαι καλά! Καλή συνέχεια. Δημήτρης

Thank you so much! I appreciate your comment. A new project is coming soon..... Take care Dimitris

Thank you very much! I appreciate your comment, sir! All the best Jimmy

¡Muchísimas gracias Pedro! ¡Me alegra que te guste! Saludos Dimitris

Hello PJ, I was thinking for quite some time now, what to reply to you. A 'Thank you' seems too simple, with a 'very much' beside it, sounds a little better, but not exactly what I want to express. I'll make a try, but I don't know if I'll manage it. So, besides the 'Thank you very much' I'll say that it gives me great pleasure hearing an expert engineer saying, that what I designed, adapt or copied throughout the entire project, has been done the right way. Take care my friend Dimitris

Παναγιώτη σε ευχαριστώ, χαίρομαι που σου αρέσει!! Καλή συνέχεια! Δημήτρης

Thank you so much for the comment, I appreciate it!! Regards from Greece Dimitris

Because the particular seller who also states that upon his improved designs the Multifix tool post and holders are built so very accurate. He puts his name on the tools and praise himself and his tools through his site and YT channel for being the best on the market - besides that he doesn't offer what he states, his tools are very expencieve. I regret the moment I bought these tools from that seller, paying so much money for something that don't worth; with half the price I would bought something similar from ebay knowing that wouldn't be perfect but at least it would be cheap! If you sir, was in that same position as me what you would think of? that there are 40 different positions to put the tool on? or that you paid so much money for something that its not so accurate as the seller states? Thank you for the comment! All the best Jimmy

If I had the extra money I would probably done it.

Thank you very much, I appreciate that you like it sir! Regards from Greece Jimmy

Ευχαριστώ για το σχόλιο! Χαίρομαι πολύ που σου αρέσει το πριονάκι. Καλή συνέχεια! Δημήτρης

Thank you so much, I'm very happy that you like! Take care my friend! Dimitris

Thanks for the comment! Unfortunately I had to cut some footage otherwise the videos would be 3 instead of 2. All the best Dimitris

What you said PJ really honors me, Thank you very much!! Glad to share as always! Cheers Dimitris

Thank you for the comment! It is a bit complex to make (if that you mean), but definitely not complex to use. All the best. Jimmy

@@JimmysCanal exactly! It is a state of the art easy to use indexer. 😃

Thank you so much, I'm super happy that you like it!! Regards from Greece Jimmy

Καλησπέρα, Αν θέλετε να μιλήσουμε στείλτε μου το τηλέφωνο σας να σας καλέσω.

Thank you for the comment! All the best Jimmy

Thank you so much, I'm really happy that like it! Take care my friend. Dimitris

Thank you too for the comment! I'm really happy that you liked the series!! All the best Dimitris

Thank you very much, I appreciate the comment! Stay tuned for the upcoming video of the lamp build All the best Dimitris

Thank you very much, I'm happy that you like it! Best regards Dimitris

Hey PJ, I don't know if a 'Thank You' is enough for your kind words! Yes, it was really satisfying especially when I saw that this tiny drill press managed to drill a hole on a 6mm thick piece of steel (something that I'm not going to do it again). Both Kosta's did fantastic work, for which I have thanked them many many times. Without their help this project would be really difficult to finish into that level. The lamp video at the moment it's in the editing stage, I hope to finish it next week? I believe that you'll like it. Thank you once again for your comment!! Take care Dimitris

Ευχαριστώ πολύ, χαίρομαι που άρεσε!! Καλή συνέχεια! Δημήτρης

Κωστή μου, χωρίς τη δική σου βοήθεια αλλά και του Κώστα ο οποίος έκανε εξαιρετική δουλειά με την ξύλινη βάση, το πρότζεκτ αυτό δεν θα μπορούσε να ολοκληρωθεί! Σας ευχαριστώ πολύ και τους δυο σας!!! Δημήτρης

Thank you so much! Cheers Dimitris

Παναγιώτη σε ευχαριστώ πολύ!! Δημήτρης

Thank you very much, I appreciate the comment! All the best Jimmy

Thank you for the comment! A few more days of wait...😁 Cheers Dimitris

Thank you so much PJ! A comment from a highly skilled engineer like you are, really honors me! All the best Dimitris

Thank you Milan, I'm happy that you like it! All the best Dimitris

Ευχαριστώ πολύ, χαίρομαι που σου αρέσει!! Καλή συνέχεια! Δημήτρης

Thank you so much amigo, your words really honors me!! Take good care Dimitris

Thanks for the comment! It slowly coming and brings a surprise... All the best Dimitris

Thank you very much, I appreciate your comment sir! You are the second viewer who tells me that has built the UTP, that's really awesome. Thank you again! Regards from Greece Dimitris